Replace the Broken Screen of Its Iphone 6

 Home » Blog

Released on September 19, 2014, the Iphone 6 is among two types of the eighth generation from the Apple brand smartphone. It marks the look evolution of iPhones with a brand new display size of four.7 inches, new curves and new colors: sidereal grey, silver and gold.

Important: The iPhone 6 requires specific tools to become disassembled. So ensure you have these power tools before you begin disassembling your iPhone 6.

damaged iphone glass

EQUIPMENT

1 Phillips screwdriver

1 pentalobe TORX precision screwdriver

2 Spudgers

1 suction cup

1 pick

REPAIR Package FOR IPHONE 6 BLACK:

Complete package to correct damaged glass and LCD for Iphone 6 black with tools

REPAIR Package FOR IPHONE 6 White-colored:

Complete package to correct damaged glass and LCD for Iphone 6 white-colored with tools

Step One

damaged iphone glass

Switch off your iPhone 6 before beginning disassembly.

Take away the two 3.6 mm Pentalobe screws near the Lighning connector.

second STEP

damaged iphone glass

The following three steps make use of the iSclack, a great tool to spread out an apple iphone 6 securely. If you’re not while using iSclack, visit step five.

Step Three

damaged iphone glass

damaged iphone iphone iphone glass

Put your iPhone 6 backward and forward suckers.

Put the iSclack’s upper pad from the screen, just over the Home button although not covering it.

Open the handles from the iSlack to shut the suction cups around the iPhone.

Center the suction cups and squeeze firmly on sides from the iPhone to stick well.

Step Four

damaged iphone glass

damaged iphone iphone iphone glass

Hold your iPhone firmly and tighten the iSclack handles to split up the suction cups.

The iSclack is made to open the iPhone sufficiently with no damage to the display cables.

Take away the two suction cups out of your iPhone.

Go ahead and take next three steps and carry on step 8

Step Five

damaged iphone glass

If you don’t come with an iSclack, make use of a single suction cup to lift the leading panel:

Press the suction cup on screen of the iPhone 6, just over the Home button.

Make certain the suction cup is firmly connected to the screen.

Step Six

damaged iphone glass

While holding the iPhone firmly with one hands, pull the suction cup to slightly separate the whole front face from the iPhone 6 base.

Spend some time since the front is connected by connectors that should not be broken.

When the front panel begins to appear, slide a little plastic tool between your screen and it is base to carry this opening.

There are many retaining clips around the entire front from the situation, so you may want to make use of a spudger and suction cup to produce the whole front panel.

STEP 7

damaged iphone glass

damaged iphone iphone iphone glass

Pull the plastic knot to produce the vacuum seal around the suction cup.

Take away the suction cup in the screen.

STEP 8

damaged iphone glass

damaged iphone iphone iphone glass

Lift the foot of the screen while using the the top phone like a hinge.

Squeeze front panel in a 90 ?? position towards the rear from the situation, fostering to not damage the cables and connections in this region.

STEP 9

damaged iphone glass

damaged iphone iphone iphone glass

Pull the screen slightly downward to totally remove the different clips that hold it to all of those other phone.

When reassembling, align the clips just beneath the very best fringe of the rear of the situation. Next, slide the leading panel up to its top edge is aligned using the one on the rear of the situation.

STEP 10

damaged iphone glass

Take away the following five Phillips screws:

Three screws 1,2 mm

A screw of just one.7 mm

A 3.1 mm screw

STEP 11

damaged iphone glass

Carefully take away the metal part.

STEP 12

damaged iphone glass

damaged iphone iphone iphone glass

Within the next four steps, make sure to lift just the cable connectors, and not the motherboard brackets.

Make use of the flat finish of the spudger to disconnect the sensor connector.

STEP 13

damaged iphone glass

damaged iphone iphone iphone glass

Make use of the flat finish of the spudger to disconnect the house button connector.

STEP 14

damaged iphone glass

damaged iphone iphone iphone glass

Make use of the flat finish of the spudger to disconnect the biometric connector.

STEP 15

damaged iphone glass

damaged iphone iphone iphone glass

Finally, make use of the flat finish of the spudger to disconnect the display.

STEP 16

damaged iphone glass

Take away the entire front panel.

STEP 17

damaged iphone glass

Take away the following screws:

A screw of two.3 mm

3. mm screw

2.2 mm screw

STEP 18

damaged iphone glass

damaged iphone iphone iphone glass

Take away the front camera bracket in the front panel.

STEP 19

damaged iphone glass

damaged iphone iphone iphone glass

Lift the leading camera.

STEP 20

damaged iphone glass

damaged iphone iphone iphone glass

Contain the front camera and take away the speaker in the front panel.

Take care not to touch the connectors together with your fingers to prevent damaging the circuits.

STEP 21

damaged iphone glass

damaged iphone iphone iphone glass

Make use of the tip of among the tools to push the sunshine sensor from the slot.

STEP 22

damaged iphone glass

damaged iphone iphone iphone glass

Fold the leading camera and sensor cable to gain access to the microphone of the iPhone 6.

STEP 23

damaged iphone glass

damaged iphone iphone iphone glass

Carefully take away the finish from the probe cable in the adhesive that holds it.

STEP 24

damaged iphone glass

Take away the front-facing camera and also the sensor cable.

STEP 25

damaged iphone glass

Take away the two screws holding the house button bracket

STEP 26

damaged iphone glass

damaged iphone iphone iphone glass

Take away the Home button bracket in the front panel.

STEP 27

damaged iphone glass

damaged iphone iphone iphone glass

Make use of the tip of the spudger to disconnect the house button connector by pushing up.

STEP 28

damaged iphone glass

damaged iphone iphone iphone glass

Lightly push top of the left corner of the house button.

Don’t push the house button an excessive amount of. Just lift part of it to consider served by a spudger.

The button is extremely fine. If you think that you might be experiencing it, apply mild heat having a blow dryer and check out again.

STEP 29

damaged iphone glass

damaged iphone iphone iphone glass

Lift the house button having a spudger to take it out of its location.

STEP 30

damaged iphone glass

damaged iphone iphone iphone glass

Make use of a spudger stitch to softly peel the house button cable in the fixing adhesive.

STEP 31

damaged iphone glass

Once all of the adhesive continues to be removed, separate the house button in the front panel.

STEP 32

damaged iphone glass

window iphone cassévitre iphone cassévitre iphone damaged

Take away the following Phillips

A screw of just one.7 mm

Six 1.6 mm screws (three on every side)

STEP 33

damaged iphone glass

damaged iphone iphone iphone glass

Lift the finish from the camera slightly in the front from the Vast screen.

Don’t attempt to totally take away the shield plate, it’s still connected to the front panel using the Home button cable.

STEP 34

damaged iphone glass

window iphone cassévitre iphone cassévitre iphone damaged

Slide the end of the spudger behind the shield plate to lightly take away the cable in the Home button.

The house button cable is extremely thin, go gradually and take care not to tear it.

Take away the LCD shield plate.

All you need to do is follow this informative guide within the other direction to place your iPhone together again using its new components.

CATEGORY AND TAGS:

Blog

Related Items